Adjusting Camera Settings and Using the Roller Controls

The aircraft camera has full control over key shooting settings, all of these settings can be found in the camera settings page in the Smart Co-Pilot System. Select the icon indicated in the diagram below to configure settings for the camera. Standard settings are similar to those found in most digital camera systems, including ISO, shutter speed, EV, quality, format etc.

ADJUST CAMERA SETTINGS WITH ROLLER CONTROLS

1. With no camera adjustment selected, press and hold on the B2 button for 2 secs (located on the top right). Release when one of the settings turns blue.

2. Roll the roller on the right (near the B2 button) to move through the different settings

3. Press the B2 button again to enter the setting, roll the roller to adjust 

4. Once you have set your setting, press the B1 button (located on the left side) to exit the expanded menu

5. Press again to close/exit the entire camera settings menu

Leave a Reply

Your email address will not be published. Required fields are marked *